| Help |
|
|
| [Index] |
|
| 1. =
Top |
|
| 2.
Single Camera |
|
| 3.
Multi-Camera |
|
| 4.
Buffered Image |
|
| 5.
Support |
|
| 6. Login |
|
| Top |
|
|
Displays Model Number =
and
Firmware Version. |
|
| Single Camera |
|
Click to Center |
Click on Camera image,=
and
Camera change the direction to the position which the mouse was clicked
|
|
Digital Zoom |
Rotating the mouse whe=
el, and
moving the mouse while holding the right mouse button. Moving the mouse or
mouse wheel away from you zooms in, and moving it towards you zooms out.<=
/td>
|
|
End/Preset=
display |
Appears on the top of =
the
Operation Bar. |
| |
| End
display: |
| |
| When
Pan/Tilt operation has reached the end, Left End, Right End, Up End
or Down End ap=
pears. |
| Preset
display: |
| Preset
name appears when clicking Preset Button. |
| |
|
Pan/Tilt Scan |
Pan/Tilt scan buttons
automatically move the lens horizontally(Pan) or vertically(Tilt) and scan
whole the movable range, and returns to the current position. |
|
Pan/Tilt/Home Position=
|
Click the arrow or cen=
ter button
to perform the Pan(left and right),Tilt(up and down) or Home Position(cen=
ter)
operation. |
|
Preset |
M=
ovement: |
| Camera
moves to the registered position. White balance, brightness will be chang=
ed
to the registered settings. |
| Program: |
| Up to
20 preset positions can be programmed. White balance, brightness settings
will be registered. |
| There
are some limitations about preset name. |
| 1 to 15
characters. |
| Cannot
use the [Space], ["], ['], [&], [<], [>]. |
| |
|
Brightness |
Brightness control has=
9 steps
including [STD]. |
| a.
[STD] |
a. The st=
andard
picture brightness is set. (default) |
| b. [-],
[+] |
b. Change the brightness of
Image. |
| |
|
White Balance |
To adjust the white ba=
lance of
the image according to the environment and lighting, select the appropria=
te
White Balance parameter. |
|
External Output |
It can set the extern=
al output
value of the I/O connector. |
| a. Open |
a. The internal trans=
istor
becomes off state, the external output terminal becomes high
impedance.(default) |
| b.
Short to GND |
b. The internal trans=
istor
becomes on, becomes a state where electrically it is short-circuited to G=
ND
and the external output terminal becomes LOW (OV). |
|
Refresh Rate |
Select MPEG-4 and Moti=
on JPEG
and the desired interval to refresh images. |
|
Resolution |
Selects the Image Reso=
lution
from 1280x1024 (JPEG only), 640x480, 320x240 (default), or 192x144. |
|
Image Quality |
Select the Image Quali=
ty (JPEG
only). |
| a.
Favor Clarity |
a. Priority is given =
to the
high image quality.(Frame rate decreases) |
| b.
Standard |
b. The standard image=
quality
is set. (default) |
| c.
Favor Motion |
c. Priority is given =
to the
fast motion of the image.(Image Quality decreases) |
| |
|
Streaming Method |
According =
to the
network environment, select Automatic, Multicast, Unicast, or HTTP as the
streaming method. |
| (MPEG-4
only) |
|
Capture image |
The camera image is ca=
ptured and
appears on a new window. You can save this image by right-clicking the im=
age
and select "Save Picture As" on the menu. |
|
Audio |
Input/output of sound=
is
adjusted. |
| a. Talk |
a. While viewing live=
images
from the camera, your voice can be heard from the camera by talking throu=
gh
the microphone of your PC. Click the talk button to mute the audio. |
| b.
Listen |
b. While viewing live=
images
from the camera, you can monitor the audio from the camera's microphone.
Click the listen button to mute the audio. |
| c.
Output adjustment slider |
c. You can adjust vol=
ume. |
|
Full Screen Mode |
The camera image displ=
ay will be
maximized. Click again to return to the original size. |
| Multi-Camera |
|
Layout |
Can select from 4-came=
ra,
9-camera, and 16-camera screens. |
|
View Type<=
/td>
| Selecting 1-4, 5-8, 9=
-12
displays the corresponding 4 cameras on 1 screen. |
| By
clicking the Camera Name, you can go to the Single Camera window of each
camera. |
| |
|
Click to Center |
Click on Camera image,=
and
Camera change the direction to the position which the mouse was clicked
|
|
Digital Zoom |
Rotating the mouse whe=
el, and
moving the mouse while holding the right mouse button. Moving the mouse or
mouse wheel away from you zooms in, and moving it towards you zooms out.<=
/td>
|
|
Resolution=
|
Selects the Image Reso=
lution
from 640x480 or 320x240 (default). |
| When
"16 Screens" is selected, Image Resolution is only 192x144 fixe=
d. |
|
Refresh Rate |
Select MPEG-4 and Moti=
on JPEG
and the desired interval to refresh images. |
|
Capture image |
The camera image is ca=
ptured and
appears on a new window. You can save this image by right-clicking the im=
age
and select "Save Picture As" on the menu. |
|
Audio |
Input/output of sound=
is
adjusted. |
| a. Talk |
a. While viewing live=
images
from the camera, your voice can be heard from the camera by talking throu=
gh
the microphone of your PC. Click the talk button to mute the audio. |
| b.
Listen |
b. While viewing live=
images
from the camera, you can monitor the audio from the camera's microphone.
Click the listen button to mute the audio. |
| c.
Output adjustment slider |
c. You can adjust vol=
ume. |
|
Full Screen Mode |
The camera image displ=
ay will be
maximized. Click again to return to the original size. |
| Buffered Image |
|
Trigger
| Ala=
rm1: |
| Displays
buffered images triggered by alarm1. |
| Alarm2: <=
/td>
|
| Displays
buffered images triggered by alarm2. |
| Timer:
|
| Displays
buffered images triggered by timer. |
| Motion Detection: |
| Displays
buffered images triggered by motion detection. |
| |
|
Play (MPEG-4 only) |
Play buffered images u=
sing
Windows Media Player. |
|
Play (JPE=
G only) |
"Play" |
| The buffered i=
mages
are displayed continuously. =
|
| "<1"
and "1>" |
| The previous or next =
image
is displayed. |
| "<10"
and "10>" |
| The
image 10th before or after is displayed. |
| "<100"
and "100>" |
| The
image 100th before or after is displayed. |
| "<1000"
and "1000>" |
| The
image 1000th before or after is displayed. |
| "<10000"
and "10000>" |
| The
image 10000th before or after is displayed. |
| "First"
and "Last" |
| The
image first or last is displayed. |
| |
|
Download |
Download b=
uffered
images to PC. |
| (MPEG-4
only) |
|
Download |
Presently =
the
designated quantity picture is downloaded from the picture. |
| (Motion
JPEG only) |
| Support |
|
Displays Help. |
|
| When
connected to the Internet, you can also access Product Information and
Support Information Web site. |
|
| Login |
|
User Name and Passwor=
d are
required. |
|
| General
User allows the camera control based on the registered Access Level. |
|
| Administrator
can access Setup and Maintenance page. |
|
| 1.
ActiveX is either a registered trademark or trademark of Microsoft
Corporation in the United States and/or other countries. |
| 2.
Ethernet is either a registered trademark or trademark of Xerox Corporati=
on
in the United States and/or other countries. |
| 3.
All other trademarks identified herein are the property of their respecti=
ve
owners. |
| 4. T=
his
product uses the part of NetBSD Kernel, OpenSSL and thttpd. Please refer =
here
for more information. |
| 5.
This software is based in part on the work of the Independent JPEG Group.=
|
|
|
|
------=_NextPart_01C781B2.FCE18B70
Content-Location: file:///C:/58F65F45/_2MHT-Panasonic_BB-HCM515A-MegaPixel-MPG4_NetworkCamerawith2-wayaudiocapability_sheet011.htm
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset="us-ascii"
| Status |
|
|
|
|
|
| Displays
Hardware/Firmware Version, Network, Protocol and Diagnosis information.
| |
| Version |
|
|
Displays
Hardware/Firmware Version. |
|
|
Model |
8.2E+20 |
|
|
Firmware(Boot) |
3.11R01 |
|
|
Firmware(Application)<=
/td>
| 3.11R01 |
|
| SD memory usage condition |
|
|
Displays t=
he total
memory available on the SD memory card and the amount of memory consumed =
by
buffered images. |
|
|
Total capacity |
512MB |
|
|
1.Motion Detection |
1% is being used. |
|
|
2.Timer |
93% is being used. |
|
| Network |
|
|
Displays t=
he network
status of the camera. |
|
|
MAC Address |
00-80-F0-84-38-59 |
|
|
Port No. |
8080=
|
|
|
IP Address |
74.164.26.174 |
|
|
Subnet Mask |
255.255.255.248 |
|
|
Default Gateway |
74.164.26.169 |
|
|
Primary Server Address=
|
74.164.26.169 |
|
|
Secondary Server Addre=
ss |
|
|
|
DHCP Server |
|
|
|
Host Name |
|
|
|
Lease Time |
0
| |
|
Lease Renewal Time |
0
| |
|
Lease Rebinding Time
| 0
| |
| Network(IPv6) |
|
|
Displays t=
he network
status of the camera. |
|
|
Port No. |
80
| |
|
IP Address |
fe80::280:f0ff:fe84:3859=
|
|
|
Default Gateway |
|
|
|
Primary Server Address=
|
|
|
|
Secondary Server Addre=
ss |
|
|
| Camera IP Address |
|
|
URL to acc=
ess camera
is displayed. |
|
|
Camera's address for L=
ocal
Network Access |
http://74.164.=
26.174:8080 |
|
|
Camera's address for A=
ccess via
Internet |
http:=
//drarush.viewnetcam.com:8080 |
|
| Viewnetcam.com |
|
|
Displays
Viewnetcam.com connection status. |
|
|
Server |
www.viewnetcam.com |
|
|
Status |
E=
nabled
(2) |
|
|
Camera URL |
drarush.viewnetcam.com
| |
| User-specified DynamicDNS |
|
|
Displays
User-specified DynamicDNS connection status. |
|
|
Server |
|
|
|
Status |
Disabled |
|
| UPnP |
|
|
Displays U=
PnP status. |
|
|
Status |
The router was not detec=
ted or
configuration was unsuccessful. |
|
| Protocol |
Displays number of succe=
ss and
error of transactions of each protocols. Auto Config shows the result of
Automatic Setup. |
|
|
Protocol |
Status |
Count |
|
|
SMTP |
Success |
0 |
|
|
Error |
0 |
|
|
POP3 |
Success |
0 |
|
|
Error |
0 |
|
|
FTP |
Success |
0 |
|
|
Error |
0 |
|
|
HTTP Notif=
ication |
Success |
0 |
|
|
Error |
0 |
|
|
NTP |
Success |
0 |
|
|
Error |
0 |
|
|
DNS |
Success |
73 |
|
|
Error |
0 |
|
|
Viewnetcam=
.com |
Success |
73 |
|
|
Error |
0 |
|
|
User-speci=
fied
DynamicDNS |
Success |
0 |
|
|
Error |
0 |
|
|
DHCP |
Success |
0 |
|
|
Error |
0 |
|
|
UPnP |
Success |
0 |
|
|
Error |
0 |
|
|
Easy-Packe=
t |
Success |
0 |
|
|
Error |
0 |
|
|
Protocol |
Status |
|
|
AutoConfig |
Failed UPnP Configuratio=
n |
|
| Error Log =
|
Displays Up to 20 Error =
Logs. |
|
Date |
Protocol |
Division |
Code |
Old logs will be overwri=
te by new
one. |
| Diagnosis =
|
|
|
Displays h=
ardware
status. Entirely in case of 0 means no problem. |
|
|
Hardware(Main) |
0
| |
|
|
|
|
|
|
------=_NextPart_01C781B2.FCE18B70
Content-Location: file:///C:/58F65F45/_2MHT-Panasonic_BB-HCM515A-MegaPixel-MPG4_NetworkCamerawith2-wayaudiocapability_sheet013.htm
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset="us-ascii"